3D Printed, Dome Figure
SIZE: Display 9”h x 6” diameter base; head 4”h x 3”w x 3.75”d
MEDIUM: Mixed media
DESCRIPTION: Head and Goggles 3D sculpted and printed in ABS thermoplastic; acrylic paints, brass hardware, copper coiled wires. Glass cabochon eyes glued into antique bronze bezel settings. Mounted on wood disc covered with natural textured paper. Displayed in an antique bell jar glass cloche with rustic wooden base and metal label holder. OOAK 1/1
3D sculpted using ZBrushCore, printed in ABS thermoplastic, 20% infill, 0.1 layer, with 0.4 nozzle diameter. The head was smoothed in a Vapor bath then primed, painted with acrylics, sealed with varnish; goggles and rings were finished with metallic Rub-N-Buff. Wire wrapped brass screws embedded into the head and neck.